What causes the electric heating belt thermostat temperature measurement is prohibited?

what causes the temperature measurement of the electric heating belt thermostat to be prohibited?

"the original title: what caused the electric heating belt thermostat temperature measurement is prohibited?

when the electric heating belt is used for cold protection, heat insulation and heat preservation of machinery and equipment such as pipelines, it can be clearly used without a thermostat according to different models and specifications. The self-limiting electric tracing belt can automatically adjust the power with the temperature change of the heating management system, and the temperature can be self-adjusted. In the case of specific application, explosion-proof temperature control device may not be used, and if you are using constant output power electric heating belt, you must install a temperature controller, which is installed on the pipeline, automatically control the material processing process temperature of the system pipeline or storage tank.

electric heat tracing system thermostat

in the whole process of specific application, in some cases, customers reflect that the temperature control of electric heat tracing system thermostat is prohibited. for this problem, we make a brief analysis. When this problem occurs, we consider whether the thermostat itself has product quality problems, resulting in temperature measurement prohibition. If this is the reason, we must disassemble and replace the temperature controller. Second, we consider whether the poor installation caused the thermostat ban, this key is reflected in the temperature controller temperature sensor camera installation part of the problem, here to remind everyone to install some ideas to complete.

1. When the temperature sensor camera is installed, the electric heating belt must be eliminated, otherwise it will be affected and the temperature measurement will be prohibited. 2. When installing the thermostat, the temperature-sensing probe must be mounted horizontally or vertically downward, and the installation location should be appropriate to prevent temperature instability. 3. The temperature control camera should be installed on the outer surface of the pipe being measured to monitor the material’s temperature. Additionally, choose a lower location for mounting the sensor to ensure more accurate temperature readings.

here, it must be a friendly reminder that when the software of the electric heating system is installed, it is best to be a professional installer with strong technology, and the system software cannot be applied normally due to installation difficulties. Alternatively, it should be installed under the guidance of technically qualified heating cable specialists. Return to Sohu.com and click to view

Editor: