Temperature Control Module

I. Product Introduction: This digital signal transmitting regulator processes the analog signals output by sensors and connects with the host computer via the communication port to measure and regulate the controlled object. It is mainly used in computerized centralized control systems, occupying few host computer hardware resources, conforming to multiple installation standards, and is an indispensable digital transmitting instrument for the new generation of industrial control systems.

II. Main Technical Indicators: 1. Input and transmission accuracy: see General Technical Parameters; 2. Communication protocol: can be provided by the supplier; 3. Input-output isolation strength: 1500V AC; 4. Installation: rail plug-in or panel type; 5. Appearance and ports: see the attached diagram. G-48×48; Q-22×75; E-48×96

III. Operation Instructions: 1. The transmitting regulator has two LEDs, red and green. The red one indicates the working status of the transmitter; when the red light is on, the signal transmission section is working. When the green light is on, the regulation section output is connected. 2. The processor has four DIP switches, K1, K2, K3 and K4. The four switches have sixteen combined states to set the processor address (factory setting is 0000H address). The difference between 16-bit and 32-bit addresses is that the 32-bit processor has built-in address selection jumper points; when shorted, the bit address is 0, otherwise 1 (factory setting is 00000H address).